Thank you for ordering the Verdmo V.004! We can't wait for you to start using it and seeing the results. This quick guide works for both V.004S and V.004T models.
**Step 0: Did you receive an e-mail to sign up for a Blynk account? If so great! Make sure you are signed up before starting. If not please contact us at help@verdmo.com before beginning.**
Step 1: Unbox your Verdmo, unscrew and open the square black box, the "hub" (this houses the brains of the sensor) and remove the brown battery separator.
Step 2: If no LEDs are flashing press the button beside the negative end of the battery for 1-2 seconds. LEDs should start to flash.
Step 3: Open the Blynk app, press "Add Device" and follow the on screen instructions to connect your Verdmo.
Step 4: Firmly screw the hub back together and install it into your desired location and begin using your Verdmo to monitor your soil moisture! (and EC/Temp is using V.004T)
Notes:
- We have detailed setup instructions available here: Detailed Setup
- You may need to charge your Verdmo's battery before use. This can be done with a USB-C cord or by removing the battery and charging it in an external charger.
- Instructions on installing the sensor are available here: Sensor Installation
- If you feel something is missing from these instructions please let us know. We are always working to improve our documentation.